Horizon Fitness PSE7 User Manual download pdf (Page 34)

BEFORE

YOU BEGIN

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

ELLIPTICAL

OPERATION

LIMITED

WARRANTY

CONDITIONING

GUIDELINES

ASSEMBLY

TROUBLESHOOTING

& MAINTENANCE

Your Horizon Fitness elliptical is designed to be reliable. However, if you do experience problems with your

elliptical, please reference the troubleshooting guide listed below.

PROBLEM: The console does not light up.

SOLUTION: Verify the following:

• The outlet the machine is plugged into is functional. Double check that the breaker has not tripped.

• The correct adapter is being used. Only use the adapter provided or authorized by Horizon Fitness.

• The adapter is not pinched or damaged and is properly plugged into the outlet AND the machine.

• The power switch is turned to the ON position (may not apply to all models).

• Turn off the machine and unplug power cord. Remove the console and check that all connections to the console

are secure and not damaged or pinched.

NOTE: If your console uses batteries, they may need to be replaced.

PROBLEM: The console lights up but the Time/RPM’s do not count.

SOLUTION: Verify the following:

• Turn off machine and unplug power cord. Remove the console and check that all connections to the console are

secure and not damaged or pinched.

• If doing the above does not fix the problem, the speed sensor and/or magnet may have become dislodged or

damaged.

PROBLEM: The resistance levels seem to be incorrect, seeming too hard or too easy.

SOLUTION: Verify the following:

• The correct adapter is being used. Only use the adapter provided or authorized by Horizon Fitness.

• Reset the console and allow the resistance to reset to the default position. Restart and retry the resistance levels.

PROBLEM: The roller wheels appear to be leaving particles on the guide rails.

SOLUTION: This is considered normal wear of the elliptical wheels.

To remove, simply wipe off the roller wheels and guide rails with a damp cloth.

PROBLEM: The elliptical makes a squeaking or chirping noise.

SOLUTION: Verify the following:

• The elliptical is on a level surface.

• Loosen all bolts attached during the assembly process, grease the threads, and tighten again.

TROUBLESHOOTING

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Horizon Fitness PSE7 User Manual Page 34

Comments to this Manuals

Related products and manuals for Fitness, gymnastics & weight training Horizon Fitness PSE7