Horizon Fitness T101 Owner's Manual download pdf (Page 4)

SERIAL NUMBER LOCATION

GROUNDING INSTRUCTIONS

This product must be grounded. If a treadmill should malfunction or breakdown, grounding provides a path of least resistance

for electrical current to reduce the risk of electrical shock. This product is equipped with a cord having an equipment-grounding

conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in

accordance with local codes and ordinances.

Connect this exercise product to a properly grounded outlet only.

Never operate product with a damaged cord or plug even if it is working properly.

Never operate any product if it appears damaged, or has been immersed in

water. Contact Customer Tech Support for replacement or repair.

WARNING

DANGER

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified

electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug

provided with the product. If it will not fit the outlet, have a proper outlet installed by a qualified electrician.

This product is for use on a nominal 110-120 Volt circuit and has a grounding plug that looks like the plug in the illustration.

Make sure that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with

this product.

This product must be used on a dedicated circuit. To determine if you are on a dedicated circuit, shut off the power to that circuit

and observe if any other devices lose power. If so, move devices to a different circuit. Note: There are usually multiple outlets

on one circuit. This treadmill should be used with a minimum 20-amp circuit.

ASSEMBLY

There are several areas during the assembly process that special attention must be paid. It is very important to follow the

assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed

correctly, the treadmill could have parts that are not tightened and will seem loose and may cause irritating noises. To

prevent damage to the treadmill, the assembly instructions must be reviewed and corrective actions should be taken.

Before proceeding, find your treadmill’s serial number located on a white barcode sticker

near the on/off power switch and power cord and enter it in the space provided below.

ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW:

» Refer to the SERIAL NUMBER and MODEL NAME when calling for service.

SERIAL NUMBER:

MODEL NAME: HORIZON

TREADMILL

WARNING

GROUNDED

POWER

CORD

3-POLE

GROUNDED

OUTLET

HZ_13_OM_T101-04_CT5.4_Rev1_3.indd 6-7 5/23/13 2:41 PM

1 2 3 4 5 6 7 8 9 ... 38 39

No comments

Horizon Fitness T101 Owner's Manual Page 4